Focusing manually

Focusing manually

When focusing manually, first focus in telephoto before recording, and then reset the shot length.

(1) Set FOCUS to MANUAL. The findicator appears in the viewfinder or on the LCD screen.

(2) Move the power zoom lever to the end of the “T” side in the optical zoom zone.

(3) Turn the NEAR/FAR dial to achieve a sharp focus.

(4)Set the desired shot length using the power zoom lever.

Advanced

1

AUTO MANUAL INFINITY

2W T W T

operations

3

FAR NEAR

To return to autofocus mode

4

WT W T

Set FOCUS to AUTO. The findicator in the viewfinder or on the LCD screen disappears.

Shooting in relatively dark places

Shoot at wide-angle after focusing in the telephoto position.

To record a very distant subject

Push FOCUS down to INFINITY. The lens focuses on the most distant subject while FOCUS is held down. When it is released, manual focus mode is resumed.

Use this function when shooting through a window or a screen, to focus on a most distant subject.

Note on manual focusing

The following indicators may appear:

when recording a very distant subject. when the subject is too close to focus on.

41