Sony CDC-X317 CD Player Operation, Playing a CD, Intro Play, One track Repeat Play, Random Play

10 Press and hold INFO until the unit turns off, and setting is completed.

When the unit is on, “MY INFO” appears in the display indicating that the unit is standby for a timer. During the timer-activated tuning, “MY INFO” continues to flash.

To cancel the timer standby, press INFO so that “MY INFO” disappears.

Note

• To discontinue the timer setting, press and hold PWR/

MUTE until the unit turns off.

• To check the setting, turn off the unit, then press INFO.

The unit displays the scheduled turn-on and turn-off

times with the appropriate radio frequency.

• The unit automatically starts tuning at the scheduled

Labeled-side up

CD indicator Track number

Elapsed playing time

time regardless of the current source mode. When the

scheduled program is over, the unit automatically

returns to the former source mode.

• Timer setting remains enabled even if you turn off the

unit, and then turn it on. This is true even if you detach

the front panel, and reattach it.

• However, if you press FNC to change the source mode

during timer-activated tuning, the scheduled program

is canceled.

To

Eject a CD

Skip to the next track

Go back to the beginning of the current track Each extra press skips backward one extra track

Locate a specific point in a track

Press

z

t

r

Press and hold r or t until you find the point.

CD PLAYER OPERATION

Playing a CD

You can play CDs, CD-Rs and CD-RWs using the procedure described below.

1Insert a CD.

“CD” appears in the display. CD play starts.

If a CD is already inserted, press FNC repeatedly to select CD play mode.

In normal play, when the last track finishes, the unit returns to the first track and continues to play.

Note

•When you play a CD that is already inserted, CD play starts at the point where it stopped the previous time. A newly inserted CD starts from the first track.

•A CD-R or CD-RW may take some time to start playing back, but this is not a malfunction.

•If a CD-R or CD-RW with no data or incompatible data is inserted, “E03” will appear in the display. The unit cannot play such discs.

Intro Play

You can locate a desired track by monitoring the first 10 seconds of all the tracks on a CD.

1Press INT during CD play. “SCAN” appears in the display.

2Press INT again when the desired track is played. The unit returns to normal CD play.

One track Repeat Play

You can play a track repeatedly.

1Press REP1 during CD play.

“REPEAT1” appears in the display.

To cancel One track Repeat Play, press REP1 again.

Random Play

You can play all the tracks in random order.

1Press RNDM during CD play.

“RANDOM” appears in the display.

To cancel Random Play, press RNDM again.

Note

During Random Play, pressing r allows you to skip only to the beginning of the current track, not to the previous track.

5 ENGLISH