Getting Started
Connecting Another CD Player
If you have a Sony CD player in which 5, 50, 200, 300, or 400 discs can be inserted and which is equipped with the CONTROL A1 (or CONTROL A1) jack and the command mode of that player can be set to CD 3, you can control that player as the second player with this player. After connecting this player and an amplifier, follow the procedure below.
Be sure to turn off the power of each player before making this connection.
To ANALOG OUT
To 2ND CD IN
To an AC outlet
To
CONTROL A1
To audio output
To an AC outlet
To audio input | Amplifier |
: Signal flow | To an AC outlet |
What cords will I need?
•Audio cord (1) (Use the cord supplied with the player to be connected.)
•Monaural (2P)
1Connect the players with an audio cord (see also “Hookups” on page 5).
2ND | ANALOG | ANALOG |
CD |
|
|
IN | OUT | OUT |
L |
| L |
|
| |
R |
| R |
|
|
2Connect the players with a monaural (2P) mini- plug cord.
CONTROL | CONTROL A1 | ||||||
|
| A1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For details on this connection, refer to the supplementary “CONTROL A1 Control System” instructions.
3Set the command mode of this player to CD1 (factory setting) or CD2, and set that of the second player to CD3.
Check the display for the current command mode of this player, if the mode is CD3, you have to change the mode as descreibed on the next page.
ALL DISCS | 1 | 2 | 3 | 4 | 5 |
|
|
|
|
| 1 | 2 | 3 | 4 | 5 |
|
|
|
|
|
|
|
| ||||||||||
DISC |
|
|
|
|
|
|
|
|
|
| 6 | 7 | 8 | 9 | 10 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| * D I S C - 1 * |
|
|
| CD1 |
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Current command mode
When the setting of both players is complete, set the CD1/2/3 switches on each remote accordingly.
For details on how to operate the second player, see “Controlling Another CD Player” on page 18 and “Playing Alternately” on page 20.
6