Sony CDP-CX210 Checking the programmed order, Changing the programmed order, Erasing the program stored in memory, Creating a program using the remote

CLEAR

2 to 6

Other tracks on other discs

4 to 6

Other tracks on the same disc

2, 3 and 6

All tracks of another disc(s)

Repeat Steps

To program

5 Press the number button of the track.

6 Press ENTER.

7 To program other discs/tracks, do the following:

Press the number button of the disc.

Press DISC.

Press PROGRAM.

1

2

3

4 To program a whole disc, skip this step and go to Step 6. Press TRACK.

·

CHECK

Playing CDs

Creating a program using the remote

PROGRAM

TRACK

DISC

Number buttons

ENTER

8Press ·to start Program Play.

To cancel Program Play

Press CONTINUE.

14

Checking the programmed order

You can check your program before or after you start playing.

Press CHECK.

Each time you press this button, the display shows the disc and track number of each step in the programmed order. (When a whole disc is programmed as one step, “AL” appears instead of the track number.) After the last step in the program, the display shows “End” and returns to the original display.

Changing the programmed order

You can change your program before you start playing.

To	You need to
Erase a track or disc	Press CHECK until the track or
	disc you want to erase appears in
	the display, then press CLEAR
Erase the last track or	Press CLEAR. Each time you
disc in the program	press the button, the last track or
	disc will be cleared.
Add tracks or discs to the	Follow the programming
end of the program	procedure
Erase the whole program	Hold down CLEAR until “All
completely	Clr” appears in the display to
	erase the whole program, then
	create a new program following
	the programming procedure

Erasing the program stored in memory

1Press PROGRAM in the stop mode.

2Hold down CLEAR until ”All Clr” appears in the display.