Playing Discs in a Group (Block Play)
You can classify discs in advance by artists, category, etc. when inserting discs into the slots, and play them only within the group (called “block”) you specified.
The player has eight blocks, and each slot is assigned to one of the blocks as shown below.
Block number | Disc slot |
|
|
1 | |
|
|
2 | |
|
|
3 | |
|
|
4 | |
|
|
5 | |
|
|
6 | |
|
|
7 | |
|
|
8 | |
|
|
You can enjoy Continuous, Shuffle or Repeat Play within a certain block.
POWER
BLOCK | · |
BLOCK
Number buttons
ENTER
·
Playing CDs
1Insert discs into the slot of the block you want, referring to the table. (See also “Inserting CDs” on page 6.)
2Press one of the BLOCK
When using the remote, press BLOCK, the number button of the block you want, then ENTER.
The block number appears in the display.
3Press ·.
Block Play starts from the disc which is the most upward number within a block and located closest to the playing position.
You can start Block Play from the disc you want
When you want to start Block Play from the disc you want, turn the JOG dial to select the disc, then press
ENTER.
To cancel Block Play
Press the corresponding BLOCK
Note
The block number does not appear if no disc is put into the block you specified.
15