Playing CDs

3Push the JOG dial.

This player starts loading. (Loading takes about one minute.)

Note

If each Disc Memo of the second CD player has more than 13 characters, the first 13 characters of each are loaded to this player.

Labeling discs of the second CD player

You can label discs of the second CD player or change the Disc Memos loaded from the second CD player.

1Press MEGA CONTROL.

The MEGA CONTROL button lights up.

2Turn the JOG dial to select the disc you want to assign a Disc Memo to.

If the disc slot you select does not have any disc, “NO DISC” appears in the display and you cannot assign a Disc Memo.

3Press INPUT.

“DISC MEMO” appears.

4Push the JOG dial.

5Input the new Disc Memo following the procedure in “Labeling Discs” on pages 23 to 25.

Note

The new Disc Memos are stored on this player’s memory, so you cannot display them on the second CD player.

Fading In or Out (CDP-CX240 only)

You can manually fade the sound in or out to prevent tracks from starting or ending abruptly.

Note that you cannot use this effect when you use the DIGITAL OUT (OPTICAL) connector.

FADER

To

Press FADER

 

 

Start play fading in

During pause. “FADE” appears in

 

the display and the Qindication

 

flashes. The play fades in.

 

 

End play fading out

When you want to start fading out.

 

“FADE” appears in the display and

 

the qindication flashes. The play

 

fades out and the player pauses.

 

 

Note

Fading lasts for about 5 seconds.

21