Playing CDs

Controlling Another CD Player (Advanced Mega Control) (CDP-CX240 only)

This unit can control a second CD player (see “Connecting Another CD Player” on page 6). Even when a second CD player is connected, the controls on both of the units will function. When you press the play button on either unit, the operating player stops and the resting player starts.

Make sure “2nd DETECTED” appears in this player’s display after turning on both players.

Note that depending on the player, you may not be able to operate all the functions of the second CD player.

The controls indicated in the illustration below are effective while the MEGA CONTROL button is lit.

Play mode buttons

(CONTINUE/SHUFFLE/

PROGRAM/REPEAT) MEGA CONTROL INPUT JOG

￿/± · P p

0/)

1Press MEGA CONTROL on this player.

The MEGA CONTROL button and “2nd” in the display light up. The display shows the current disc number or disc memo of the second player.

ALL DISCS

 

4

 

CD1

 

 

2nd DISC

* D I S C - 4 *

Current disc number or the Disc Memo

2Select the play mode you want.

To program tracks, use the controls on the second player.

You cannot change the second CD player’s ALL DISCS Play mode to 1 DISC Play mode, and vice versa, by using the play mode button on this player.

3Press ·on this player to start playing.

The play starts and the display shows the current disc and track numbers and the playing time of the track.

While the MEGA CONTROL button is lit, you can control the second player with the controls on this player.

To control the second player directly using the supplied remote

Set CD 1/2/3 on the remote to CD 3 which is the same position as the COMMAND MODE selector on the rear panel of the second player.

To control this player again

Press MEGA CONTROL. The MEGA CONTROL button goes off and you can control this player.

Loading the Disc Memos of the second CD player

If the second CD player has the Disc Memo function (see page 23), you can load the Disc Memos of the second CD player to this player’s memory and display them on this player.

1Press INPUT.

2Turn the JOG dial until “LOAD 2ND MEMO” appears in the display.

ALL DISCS

CD1

L O A D 2 N D M E M O

20