Playing CDs
Loading the Disc Memos of the second CD player
If the second CD player has the Disc Memo function (see page 24), you can load the Disc Memos of the second CD player into this player’s memory and display them on this player.
1Press MENU/NO.
2Turn the JOG dial until “LOAD 2ndMEMO?” flashes in the display.
ALL DISCS
CD1
L O A D 2 n d M E M O ?
3Push the JOG dial.
This player starts loading. (Loading takes about one minute.)
Note
If each Disc Memo of the second CD player has more than 13 characters, only the first 13 characters of that Disc Memo is loaded into this player.
Labeling discs of the second CD player
You can label discs of the second CD player or change the Disc Memos loaded from the second CD player.
1Press MEGA CONTROL.
The MEGA CONTROL button lights up.
2Turn the JOG dial to select the disc you want to assign a Disc Memo to.
If the disc slot you select does not have any disc, “NO DISC” appears in the display and you cannot assign a Disc Memo.
3Press MENU/NO. “MEMO IN ?” appears.
4Push the JOG dial.
5Input the new Disc Memo following the procedure in “Labeling Discs” on page 24.
Note
The new Disc Memos are stored on this player’s memory, so you cannot display them on the second CD player.
You can manually fade the sound in or out to prevent tracks from starting or ending abruptly.
Note that you cannot use this effect when you use the DIGITAL OUT (OPTICAL) connector.
FADER
+100
I / u
To | Press FADER |
|
|
Start play fading in | During pause. “FADE” appears in |
| the display and the Q indication |
| flashes. The play fades in. |
|
|
End play fading out | When you want to start fading out. |
| “FADE” appears in the display and |
| the q indication flashes. The play |
| fades out and the player pauses. |
|
|
Note
Fading lasts for about 5 seconds.