
2Select the play mode you want.
To program tracks, use the controls on the second player.
3Press á on this player to start playing.
The play starts and the display shows the current disc and track numbers and the playing time of the track.
While the MEGA CONTROL button is lit, you can control the second player with the controls on this player.
To control the second player directly using the supplied remote
Set CD 1/2/3 on the remote to CD 3 which is the same position as the COMMAND MODE selector on the rear panel of the second player.
To control this player again
Press MEGA CONTROL. The MEGA CONTROL button goes off and you can control this player.
Playing Alternately (No-Delay Play/X-Fade Play)
When you connect the second player, you can play tracks in this player and those in the second player alternately in any play mode (see “Connecting Another CD Player” on page 6).
Select one of the following methods:
•
•
Playing CDs
NO DELAY | á |
1Select the play mode you want on each player.
2When you select
Press NO DELAY.
“NO DELAY” appears in the display.
When you select
Press
Each time you press the
indication appears as follows:
nFULL n30 n60 n90 nOFF
To change the current player each time a whole track is finished, select “FULL.”
To change the current player at the specified interval, press
3Press áto start playing.
The MEGA CONTROL button lights up while the track in the second player is selected.
To cancel
Press the corresponding button repeatedly until “NO DELAY” or
You can change the method
Press the corresponding button (NO DELAY or
Notes
•The play starts from the second player if you start play while the MEGA CONTROL button is lit.
•When one player has played all the discs/tracks in the player ahead of the other player, the play stops.
•Do not use the controls on the second player during
21