Playing CDs
4Repeat Steps 2 and 3 to program the tracks in the order you want.
5Press ·to start Program Play.
To cancel Program Play
Press PLAYMODE.
When tracks, which aren’t numerically consecutive on the disc, are programmed consecutively (i.e. 1, 3, 5 etc.)
A
The program remains even after the Program Play ends
When you press ·, you can play the same program again.
Notes
•The total playing time doesn’t appear in the display when it exceeds 100 minutes.
•“FULL” appears in the display when you try to add a track to a program which already contains 24 tracks.
Creating a program using the remote (CDP- XE500 only) Z
PROGRAM
Number buttons
>10CLEAR CHECK
(
1Press PROGRAM before you start playing. “PROGRAM” appears in the display.
2Press number buttons of the tracks you want to program in the order you want.
Example: To program the tracks 2, 8 and 5. Press number buttons in the order 2, 8 and 5.
Last programmed track | Playing order |
After one second | Programmed tracks |
Total playing time
To select a track with a number over 10
Use >10 button (see page 8).
If you’ve made a mistake
Press CLEAR, then press the correct track number.
3Press ( to start Program Play.
To cancel Program Play
Press CONTINUE.
When tracks, which aren’t numerically consecutive on the disc, are programmed consecutively (i.e. 1, 3, 5 etc.)
A
The program remains even after the Program Play ends
When you press (, you can play the same program again.
You can check the total playing time while programming using the remote (Program Edit)
To select a track, press = or + and check the total playing time. Then press PROGRAM to confirm your selection.
Notes
•The total playing time doesn’t appear in the display when it exceeds 100 minutes.
•“FULL” appears in the display when you try to add a track to a program which already contains 24 tracks.
10