Ejecting the Disc
To eject the disc, press the eject button on the front panel. The drawer comes out automatically.
Press the eject button.
Note:
The eject button does not work if it is disabled by:
–the software you are using
–the PREVENT/ALLOW jumper.
■Opening the drawer manually in an emergency
You can open the drawer manually when it fails to come out by means of the eject button or software commands. To do this, follow the procedure below:
1Turn off the power of your computer.
2Insert a pointed object, such as a paper clip, into the emergency eject hole and push.
Insert a pointed object to the emargency eject
hole.
Approx. 40 mm
After removing a disc from the drive unit, consult your dealer or qualified service personnel.
Operating the Drive 23