Memorising Only the
Desired Stations
1 Select the desired band (page 7).
2 Tune in the station which you wish to store on a preset number button.
3 Press and hold the desired preset number button ( INTRO1 to 6 ) for about
two seconds until you hear a beep tone.
The number of the pressed preset number button appears in the display window.
Up to 6 stations on each band (FMI, FMII, FMIII and AM) can be stored on the preset number buttons in the order of your choice. Therefore, 18 stations can be memorised on FM. If you try to store another station on the same preset number button, the previously stored station will be erased.
EN
Other Functions
Adjusting the Sound Characteristics
1 Select the item you want to adjust by pressing the SEL button repeatedly.
VOL (volume) nBAS (bass) nTRE (treble) nBALANCE (balance) nFADER (fader) nVOL (volume) n···
2 Adjust the selected item by pressing either side of the +/– button.
Adjust within three seconds after selecting. (After three seconds the buttons will again serve as volume control buttons.)
Receiving the Memorised Stations
1 Select the desired band (page 7).
2 Press momentarily the preset number
INTRO
button ( 1 to 6 ) on which the desired station is stored.
Note
If you press the preset number button for more than two seconds, the currently received station will be memorised. To receive the previously memorised station, make sure that the preset number button is pressed only momentarily.
Enjoying Bass and Treble at Low Volume
— Loudness Function
Press the LOUD button. n“LOUD” will appear on the display.
The bass and treble will be boosted. To cancel, press again.
Muting the Sound Quickly
— Mute Function
Press the MUTE button. nThe “MUTE” indication flashes.
The sound is muted at once.
To restore the previous volume level, press again.
This function will be also cancelled when:
—+ side of the +/– or OFF button is pressed.
—ejecting a CD by pressing the 6 button during CD playback.
8
Actual total number: | Sony |
|
|
