Locating a specific track
—Automatic Music Sensor (AMS)
During playback, push the SEEK/AMS control up or down and release for each track you want to skip.
Radio
To locate succeeding tracks
To locate preceding tracks
SEEK/AMS
Memorizing stations automatically
— Best Tuning Memory (BTM)
Locating a specific point in a track
—Manual Search
During playback, push the SEEK/AMS control up or down and hold. Release when you have found the desired point.
SEEK/AMS
To search forward
To search backward
Note
If “ ” or “ ” appears in the display, you have reached the beginning or the end of the disc and you cannot go any further.
Playing a CD in various modes
Playing tracks repeatedly
—Repeat Play
Press (1) during playback.
“REP” appears in the display.
When the current track is over, it will play again from the beginning.
To cancel this mode, press again.
Playing tracks in random order
—Shuffle Play
Press (2) during playback.
“SHUF” appears in the display.
To cancel this mode, press again.
This unit selects the stations with the strongest signals and memorizes them in the order of their frequencies. You can store up to 6 stations on each band (FM I, FM II, FM III, and AM).
Caution
When tuning in stations while driving, use Best Tuning Memory to prevent accidents.
1 Press (SOURCE) repeatedly to select the tuner.
Each time you press (SOURCE), the mode changes as follows:
CD ÷TUNER
2 Press (MODE) repeatedly to select the band.
Each time you press (MODE), the band changes as follows:
Ó FM I Ó FM II Ó FM III Ó AM 
3 Press (SENS/BTM) for two seconds.
The unit stores stations in the order of their frequencies on the number buttons.
A beep sounds when the setting is stored.
Notes
•The unit does not store stations with weak signals. If only a few stations can be received, some number buttons will retain their former setting.
•When a number is indicated in the display, the unit starts storing stations from the one currently displayed.
•If a CD is not in the unit, only the tuner band appears even if you press (SOURCE).
8