Storing the station names

—Station Memo

You can assign a name to each radio station and store it in memory. The name of the station currently tuned in appears in the display. You can assign a name of up to eight characters per station.

Storing the station names

1 Tune in a station whose name you want to store.

2 Press (LIST) for two seconds.

3 Enter the characters.

1Rotate the dial clockwise to select the

desired characters.

(A nB nC n··· Z n0 n1 n2 n

··· 9 n+ n– n* n/ n\ n> n< n. n_ )

If you rotate the dial counterclockwise, the characters appear in the reverse order.

If you want to put a blank space between characters, select “_” (under- bar).

2Press (4) (n) after locating the desired character.

The flashing cursor moves to the next space.

If you press (1) (N), the flashing cursor moves to the left.

3Repeat steps 1 and 2 to enter the entire name.

4 To return to normal radio reception, press (LIST) for two seconds.

Tip

To erase or correct a name, enter “_” (under-bar) for each character.

Displaying the station name

Press (DSPL) during radio reception.

Each time you press (DSPL), the item changes as follows:

z Station name*

z Frequency

Clock Z

*If the station name of a station is not stored, “NO NAME” appears in the display for one second.

Erasing the station name

1 Tune in any station and press (LIST) for two seconds.

2 Press (DSPL) for two seconds.

3 Rotate the dial to select the name that you want to erase.

4 Press (5) (ENTER) for two seconds. The name is erased.

Repeat steps 3 and 4 if you want to erase other names.

5 Press (LIST) for two seconds.

The unit returns to the normal radio reception mode.

10