Getting Started
Resetting the unit
Attaching the front panel
Align part A of the front panel to part B of the unit as illustrated, and push until it clicks.
Before operating the unit for the first time or after replacing the car battery, you must reset the unit.
Press the reset button with a pointed object, such as a
B
Notes
A
Reset button
Note
When you connect the power supply cord to the unit or reset the unit, wait for about 10 seconds before you insert a
EN disc. Do not insert a disc within these 10 seconds, otherwise, the unit will not be reset.
Detaching the front panel
You can detach the front panel of this unit to prevent the unit from being stolen.
1 Press (OFF).
2 Press (RELEASE) to open up the front panel. Then slide the front panel a little to the left, and pull it off towards you.
(OFF)
(RELEASE)
Notes
•Be sure not to drop the panel when detaching it from the unit.
•If you press (RELEASE) to detach the panel while the unit is still on, the unit will turn off automatically to prevent the speakers from being damaged.
4
•Be sure not to attach the front panel upside down.
•Do not press the front panel hard against the unit when attaching it. Press it lightly against the unit.
•When you carry the front panel with you, put it in the supplied front panel case.
•Do not press hard or put excessive pressure on the display windows of the front panel.
•Do not expose the front panel to direct sunlight, heat sources such as hot air ducts, and do not leave it in a humid place. Never leave it on the dashboard of a car parked in direct sunlight where there may be a considerable rise in temperature.
Caution alarm
If you turn the ignition key switch to the OFF position without removing the front panel, the caution alarm will beep for a few seconds (only when the POWER SELECT switch is set to the A position).
Actual total number: | Sony |
|
|
