Other Functions

You can connect an optional rotary commander (RM-X4S) with this unit.

Labelling the rotary commander

Depending on how you mount the rotary commander, attach the appropriate label as shown in the illustration below.

Each time you press (SOURCE), the source changes as follows:

TUNER nCD nMD*

*If the corresponding optional equipment is not connected, this item will not appear.

Pressing (MODE) changes the operation in the following ways;

•Tuner: FM1 nFM2 nAM

•CD unit: CD1 nCD2 n…

•MD unit: MD1 nMD2 n…

By rotating the control (the SEEK/AMS control)

LIST

MODE

SOUND

SOUND

MODE

LIST

Using the rotary commander

The rotary commander works by pressing buttons and/or rotating controls.

You can also control optional CD or MD units with the rotary commander.

By pressing buttons (the SOURCE and MODE buttons)

(SOURCE)

(MODE)

Rotate the control and release it to: •Locate a specific track on a disc. Rotate

and hold the control until you locate the specific point in a track, then release it to start playback.

•Tune in stations automatically. Rotate and hold the control to find a specific station.

By pushing in and rotating the control (the PRESET/DISC control)

Push in and rotate the control to: •Receive the stations memorised on the

number buttons. •Change the disc.

13