Setting the Dynamic Soundstage Organizer (DSO)

If your speakers are installed into the lower part of the doors, the sound will come from below and may not be clear.

The DSO (Dynamic Soundstage Organizer) function creates a more ambient sound as if there were speakers above the dashboard (virtual speakers).

You can store the DSO setting for each source.

DSO mode and image of virtual speakers

*3

*3

*2

*2

*1

 

*1

*4

*4

*1 DSO-1

*2 DSO-2

*3 DSO-3

*4 DSO-OFF

1 Press (SOURCE) to select a source (Radio, CD or MD).

2 Press (DSO) repeatedly until the desired DSO setting appears.

Each time you press (DSO), the DSO setting changes.

To cancel the DSO function, select “DSO- OFF.” After 3 seconds, the display returns to normal play mode.

Notes

Depending on the type of car interior or type of music, DSO may not have a desirable effect.

If FM broadcasts are difficult to hear, set DSO to “OFF.”

20

Additional Information

Maintenance

Fuse replacement

When replacing the fuse, be sure to use one matching the amperage rating stated on the original fuse. If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction. In such a case, consult your nearest Sony dealer.

Fuse (10 A)

Warning

Never use a fuse with an amperage rating exceeding the one supplied with the unit as this could damage the unit.

Cleaning the connectors

The unit may not function properly if the connectors between the unit and the front panel are not clean. In order to prevent this, detach the front panel (page 8) and clean the connectors with a cotton swab dipped in alcohol. Do not apply too much force. Otherwise, the connectors may be damaged.

Main unit

Back of the front panel

Notes

For safety, turn off the ignition before cleaning the connectors, and remove the key from the ignition switch.

Never touch the connectors directly with your fingers or with any metal device.