Radio
The unit can store up to 6 stations per band (FM1, FM2, FM3, AM1, and AM2).
Caution
When tuning in stations while driving, use Best Tuning Memory to prevent accidents.
Receiving the stored stations
1 Press (SOURCE) repeatedly to select the radio.
2 Press (MODE) repeatedly to select the band.
3 Press the number button ((1) to (6)) on which the desired station is stored.
Storing stations automatically
— Best Tuning Memory (BTM)
The unit selects the stations with the strongest signals within the selected band, and stores them in the order of their frequency.
1 Press (SOURCE) repeatedly to select the radio.
2 Press (MODE) repeatedly to select the band.
3 Press (BTM) for 2 seconds.
The unit stores stations in the order of their frequencies on the number buttons.
A beep sounds when the setting is stored.
Notes
•If only a few stations can be received due to weak signals, some number buttons will retain their former settings.
•When a number is indicated in the display, the unit starts storing stations from the one currently displayed.
If preset tuning does not work
— Automatic tuning/Local Seek Mode
Automatic tuning:
Press (SEEK) (+) or (SEEK)
Scanning stops when the unit receives a station. Repeat the operation until the desired station is received.
Local Seek Mode:
If the automatic tuning stops too frequently, press (SENS) repeatedly until
“LCL” indicator is displayed.
Only the stations with relatively strong signals will be tuned in.
To cancel the local seek mode, press (SENS) twice when receiving FM.
Note
When receiving AM, to cancel the local seek mode, press (SENS)
Tip
If you know the frequency of the station you want to listen to, press and hold (SEEK) (+) or (SEEK)
continue to next page t
13