3Pull out the release keys to remove the protection collar.
2Remove the unit.
1Insert both release keys simultaneously until they click.
Hook facing inwards.
2Pull the release keys to unseat the unit.
3Slide the unit out of the mounting.
Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
23.2watts per channel minimum continuous average power into 4 ohms, 4 channels driven from 20 Hz to 20 kHz with no more than 5% total harmonic distortion.
CEA2006 Standard
Power Output: 17 Watts RMS ⋅ 4 at 4 Ohms < 1% THD+N
SN Ratio: 82 dBA
(reference: 1 Watt into 4 Ohms)
CD Player section
Signal-to-noise ratio: 120 dB
Frequency response: 10 – 20,000 Hz
Wow and flutter: Below measurable limit
16
Tuner section
FM
Tuning range:
87.5– 107.9 MHz
87.5– 108.0 MHz (at 50 kHz step)
87.5– 107.9 MHz (at 200 kHz step)
FM tuning interval: 50 kHz/200 kHz switchable (CD-
Antenna terminal: External antenna connector
Intermediate frequency: 10.7 MHz/450 kHz
Usable sensitivity: 9 dBf
Selectivity: 75 dB at 400 kHz
Harmonic distortion at 1 kHz: 0.5 % (stereo),
0.3% (mono) Separation: 35 dB at 1 kHz Frequency response: 30 – 15,000 Hz
AM
Tuning range:
530 – 1,710 MHz
531 – 1,602 kHz (at 9 kHz step)
530 – 1,710 kHz (at 10 kHz step)
AM tuning interval: 9 kHz/10 kHz switchable (CDX- F50M only)
Antenna terminal: External antenna connector
Intermediate frequency: 10.7 MHz/450 kHz
Sensitivity: 30 µV
Power amplifier section
Outputs: Speaker outputs (sure seal connectors)
Speaker impedance: 4 – 8 ohms
Maximum power output: 52 W ⋅ 4 (at 4 ohms)
General
Outputs:
Audio outputs terminal (front, sub/rear switchable) Power antenna relay control terminal
Power amplifier control terminal
Inputs:
Telephone ATT control terminal Illumination control terminal BUS control input terminal
BUS audio input terminal
Remote controller input terminal Antenna input terminal
Tone controls:
Low: ±10 dB at 60 Hz (XPLOD)
Mid: ±10 dB at 1 kHz (XPLOD)
High: ±10 dB at 10 kHz (XPLOD) Power requirements: 12 V DC car battery
(negative ground)
Dimensions: Approx. 178 ⋅ 50 ⋅ 177 mm (7 1/8 ⋅ 2 ⋅ 7 in) (w/h/d)
Mounting dimensions: Approx. 182 ⋅ 53 ⋅ 161 mm (7 1/4 ⋅ 2 1/8 ⋅ 6 3/8 in) (w/h/d)
Mass: Approx. 1.2 kg (2 1b 10 oz)
Supplied accessories:
Card remote commander:
Parts for installation and connections (1 set) Front panel case (1)