Receiving a station through a list — list-up

You can list up the frequency or the name. For details on labelling a station, see page 10.

1Select the band, then press (LIST).

The frequency or station name appears.

2Press (LIST) repeatedly until the desired station appears.

After 5 seconds, the unit returns to normal reception mode.

3Press (SEEK) –/+ to receive the station.

With the card remote commander

In step 2, to select the station, press M or m.

Other functions

Changing the sound settings

Adjusting the sound characteristics — BAL/FAD/SUB

You can adjust the balance, fader, and subwoofer volume.

1Press the select button repeatedly until “BAL,” “FAD” or “SUB” appears.

The item changes as follows:

LOW*1 t MID*1 t HI*1 t

BAL (left-right) t FAD (front-rear) t SUB (subwoofer volume)*2

*1 When EQ3 is activated (page 9).

*2 When the audio output is set to “SUB” (page 10).

“ATT” is displayed at the lowest setting, and can be adjusted up to 20 steps.

2Rotate the volume control dial repeatedly to adjust the selected item.

After 3 seconds, the setting is complete and the display returns to normal play/reception mode.

Note

Adjust within 3 seconds of selecting the item.

With the card remote commander

In step 2, to adjust the selected item, press <, M, , or m.

Adjusting the equalizer curve
— EQ3

You can adjust and store the equalizer settings for different tone ranges.

1Select a source, then press (EQ3) repeatedly to select the EQ3 type.2Press the select button repeatedly until “LOW,” “MID” or “HI” appears.

3Rotate the volume control dial repeatedly to adjust the selected item.

The volume level is adjustable in 1 dB steps, from –10 dB to +10 dB.

Repeat steps 2 and 3 to adjust the equalizer curve.

continue to next page t 9