Receiving the stored stations

1 Press (SOURCE) repeatedly to select the radio.

2 Press (MODE) repeatedly to select the band.

3 Press the number button ((1) to (6)) on which the desired station is stored.

Tip

Press M or m to receive the stations in the order they are stored in the memory (Preset Search function).

If preset tuning does not work

Press < or , to search for the station (automatic tuning). Scanning stops when the unit receives a station. Repeat until the desired station is received.

Tips

•If automatic tuning stops too frequently, turn on the Local Seek to limit seek to stations with stronger signals. For details, see “Changing the sound and display settings” on page 21.

•If you know the frequency of the station you want to listen to, press and hold < or , to locate the approximate frequency, then press < or , repeatedly to fine adjust to the desired frequency (manual tuning).

If FM stereo reception is poor

Select monaural reception mode For details, see “Changing the sound and display settings” on page 21.

The sound improves, but becomes monaural (“ST” disappears).

Note

If interference occurs, this unit will automatically narrow the reception frequency to eliminate noise (IF Auto function). In such cases, some FM stereo broadcasts may become monaural while in the stereo reception mode.

Tips

•To always hear FM stereo broadcasts in stereo, you can change the IF Auto setting and widen the frequency signal reception. For details, see “Changing the sound and display settings” on page 21. Note that some interference may occur in this setting.

•If FM broadcasts are difficult to hear, set DSO to “OFF” (page 23).

Storing only the desired stations

You can manually preset the desired stations on any chosen number button.

1 Press (SOURCE) repeatedly to select the radio.

2 Press (MODE) repeatedly to select the band.

3 Press < or , to tune in the station that you want to store.

4 Press the desired number button ((1) to (6)) for 2 seconds until “Memory” appears.

The number button indication appears in the display.

Note

If you try to store another station on the same number button, the previously stored station will be erased.

16