Setting the Dynamic Soundstage Organizer (DSO)

If your speakers are installed into the lower part of the doors, the sound will come from below and may not be clear.

The DSO (Dynamic Soundstage Organizer) function creates a more ambient sound as if there were speakers in the dashboard (virtual speakers).

You can store the DSO setting for each source.

*3

*3

*2

*2

*1

 

*1

*4

*4

*1 DSO 1

*2 DSO 2

*3 DSO 3

*4 DSO OFF

1 Press (SOURCE) to select a desired source.

2 Press (DSO) to select “1, 2, 3” or “OFF.”

To cancel the DSO mode, select “OFF.” After 3 seconds, the display returns to the normal play mode.

Notes

Depending on the type of car interior or type of music, DSO may not have a desirable effect.

If FM broadcasts are difficult to hear, set DSO to “OFF.”

Selecting the display mode and display image

You can select from 3 different display modes. You can also select various display images in Wallpaper mode (1-5), Spectrum analyzer mode (1-5) and Movie mode (1-3).

Note

The default setting of Auto Image mode is “A.IMG-All.” After a few seconds of releasing (IMAGE), the unit returns to Auto Image mode. If you want to display a display image, set to “A.IMG-off” (page 24).

Selecting the display image

1 Press (SOURCE) to select a desired source.

2 Press (IMAGE) on the unit repeatedly to select the desired display image.

Example: Wallpaper mode

Each time you press (IMAGE), the display image changes as follows:

Wallpaper mode 1-5 t Spectrum analyzer mode 1-5 t Movie mode 1-3 t normal play mode

To cancel this mode, select normal play mode.

continue to next page t

23