Adjusting setup items — SET

1Press and hold the select button.

The setup display appears.

2Press the select button repeatedly until the desired item appears.

3Rotate the volume control dial to select the setting (example “ON” or “OFF”).

4Press and hold the select button.

The setup is complete and the display returns to normal play/reception mode.

Note

Displayed items will differ, depending on the source and setting.

The following items can be set (follow the page reference for details):

“z” indicates the default settings.

CLOCK-ADJ(Clock Adjust) (page 4)

CT (Clock Time)

To set “CT-ON” or “CT-OFF” (z) (page 9, 10).

BEEP

To set “BEEP-ON” (z) or “BEEP-OFF.”

AUX-A*1(AUX Audio)

To turn the AUX source display “AUX-A-ON” (z) or “AUX-A-OFF” (page 11).

A.OFF (Auto Off)

To shut off automatically after a desired time when the unit is turned off,

–“A.OFF-NO” (z), “A.OFF-30S (Seconds),” “A.OFF-30M (Minutes)” or “A.OFF-60M (Minutes).”

SUB/REAR*1

To switch the audio output.

–“SUB-OUT” (z): to output to a subwoofer.

–“REAR-OUT”: to output to a power amplifier.

DEMO (Demonstration)

To set “DEMO-ON” (z) or “DEMO-OFF.”

DIM (Dimmer) (CDX-GT222/GT220/GT121 only)

To change the brightness of the display.

–“DIM-ON”: to dim the display.

–“DIM-OFF” (z): to deactivate the dimmer.

ILM (Illumination) (CDX-GT225C only)

To change the illumination color: “ILM-1” (z) or “ILM-2.”

M.DSPL (Motion Display)

To select the Motion Display mode.

–“M.DSPL-ON” (z): to show moving patterns.

–“M.DSPL-OFF”: to deactivate the Motion Display.

A.SCRL (Auto Scroll)

To scroll long displayed item automatically when the disc/album/track is changed.

–“A.SCRL-ON” (z): to scroll.

–“A.SCRL-OFF”: to not scroll.

LOCAL (Local Seek Mode)

–“LOCAL-ON” : to only tune into stations with stronger signals.

–“LOCAL-OFF” (z): to tune normal reception.

MONO*2 (Monaural Mode)

To improve poor FM reception, select monaural reception mode.

–“MONO-ON” : to hear stereo broadcast in monaural.

–“MONO-OFF” (z): to hear stereo broadcast in stereo.

REG*2 (Regional)

To set “REG-ON” (z) or “REG-OFF” (page 9).

LPF*3 (Low Pass Filter)

To select the subwoofer cut-off frequency: “LPF OFF” (z), “LPF125Hz” or “LPF 78Hz.”

LOUD (Loudness)

To allow you to listen clearly at low volume levels.

–“LOUD-ON” : to reinforce bass and treble.

–“LOUD-OFF” (z): to not reinforce bass and treble.

BTM (page 8)

*1 When the unit is turned off.

*2 When FM is received.

*3 When the audio output is set to “SUB.”

Using optional equipment

Auxiliary audio equipment

By connecting an optional portable audio device to the AUX input jack (stereo mini jack) on the unit and then simply selecting the source, you can listen on your car speakers. The volume level is adjustable for any difference between the unit and the portable audio device. Follow the procedure below:

Connecting the portable audio device

1Turn off the portable audio device.

2Turn down the volume on the unit.

3Connect to the unit.

continue to next page t

11