7
FDisc slot
Insert the disc (label side up), playback
starts.
GDisplay window
HAUX input jack page 11
To connect a portable audio device.
IZ (eject) button
To eject the disc.
JDSPL (display)/SCRL (scroll) button
page 8
To change display items (press); scroll the
display item (press and hold).
K (front panel release) button page 5
LMODE button page 8
To select the radio band (FM/MW/SW).
MBTM button page 8
To start the BTM function (press and hold).
NFrequency select switch (located on the
bottom of the unit)
See “Frequency select switch” in the
supplied installation/connections manual.
ONumber buttons
CD:
(1)/(2): ALBUM –/+ (during MP3/WMA
playback)
To skip albums (press); skip albums
continuously (press and hold).
(3): REP* page 8
(4): SHUF page 8
(6): PAUSE
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
PReceptor for the card remote
commander
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 4).
qj < (.)/, (>) buttons
To control radio/CD, the same as (SEEK) –/
+ on the unit.
Setup, sound setting, etc., can be operated by
< ,.
qk DSPL (display) button page 8
To change display items.
ql VOL (volume) +*/– button
To adjust volume.
w; ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
wa SEL (select) button
The same as the select button on the unit.
ws M (+)/m (–) buttons
To control CD, the same as (1)/(2)
(ALBUM –/+) on the unit.
Setup, sound setting, etc., can be operated by
M m.
wd SCRL (scroll) button
To scroll the display item.
wf Number buttons
To receive stored stations (press); store
stations (press and hold).
*This button has a tactile dot.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless (SOURCE) on the unit is pressed, or a disc is
inserted to activate the unit first.