1 | 2 |
Face the hook inwards.
|
|
| |
|
|
|
|
| |
| |
| | |
|
| | ||
|
|
|
| |
1 |
| 2 | 3 |
|
|
|
| Dashboard |
|
|
|
| | Fire wall |
|
|
|
| |
182 | mm |
| |
|
|
|
| ||
|
|
|
| |
|
|
|
| |
| 53 | mm |
|
|
|
|
|
| |
|
|
|
| |
|
| Claws |
|
|
|
|
|
| |
A TOYOTA |
|
| B NISSAN |
|
max. size |
|
| |
|
|
| max. size |
| |
5 × 8 mm |
|
| 5 × 8 mm |
|
(7/32 × 11/32 in) |
|
| (7/32 × 11/32 in) |
|
|
| to dashboard/center console |
| to dashboard/center console |
|
|
|
| |
Bracket |
| |
| |
|
| max. size | Bracket | max. size |
|
| 5 × 8 mm |
| 5 × 8 mm |
|
| (7/32 × 11/32 in) |
| (7/32 × 11/32 in) |
|
| Bracket |
| Bracket |
|
|
|
| |
Existing parts supplied with your car | Existing parts supplied with your car |
| ||
A |
| B |
|
|
Precautions
•Choose the installation location carefully so that the unit will not interfere with normal driving operations.
•Avoid installing the unit in areas subject to dust, dirt, excessive vibration, or high temperatures, such as in direct sunlight or near heater ducts.
•Use only the supplied mounting hardware for a safe and secure installation.
Mounting angle adjustment
Adjust the mounting angle to less than 45°.
Removing the protection collar and the bracket 
Before installing the unit, remove the protection collar and the bracket from the unit.
1 Remove the protection collar .
Pinch both edges of the protection collar , then pull it out.
2 Remove the bracket .
Insert both release keys together between the unit and the bracket until they click.
Pull down the bracket , then pull up the unit to separate
Mounting example
Installation in the dashboard
Notes
•Bend these claws outward for a tight fit, if necessary
•Make sure that the 4 catches on the protection collar are properly engaged in the slots of the unit
Mounting the unit in a Japanese car 
You may not be able to install this unit in some makes of Japanese cars. In such a case, consult your Sony dealer.
Note
To prevent malfunction, install only with the supplied screws .
How to detach and attach the front panel 
Before installing the unit, detach the front panel.
-A To detach
Before detaching the front panel, be sure to press . Press , and pull it off towards you.
-B To attach
Engage part of the front panel with part of the unit, as illustrated, and push the left side into position until it clicks.
Warning if your car’s ignition has no ACC position
Be sure to set the Auto Off function. For details, see the supplied Operating Instructions.
The unit will shut off completely and automatically in the set time after the unit is turned off, which prevents battery drain.
If you do not set the Auto Off function, press and hold until the display disappears each time you turn the ignition off.
