10

Other functions

Changing the sound settings

Adjusting the sound

characteristics — BAL/FAD/SUB

You can adjust the balance, fader, and subwoofer
volume.
1Press the select button repeatedly
until “BAL,” “FAD” or “SUB” appears.
The item changes as follows:
LOW*1 t MID*1 t HI*1 t
BAL (left-right) t FAD (front-rear) t
SUB (subwoofer volume)*2 t AUX*3
*1 When EQ3 is activated (page 10).
*2 When the audio output is set to “SUB-OUT”
(page 10).
“ATT” is displayed at the lowest setting, and can
be adjusted up to 21 steps.
*3 When AUX source is activated (page 11).
2Rotate the control dial to adjust the
selected item.
After 5 seconds, the setting is complete and
the display returns to normal reception/play
mode.

Customizing the equalizer curve

— EQ3

“CUSTOM” of EQ3 allows you to make your
own equalizer settings.
1Select a source, then press (EQ3)
repeatedly to select “CUSTOM.
2Press the select button repeatedly
until “LOW,” “MID” or “HI” appears.
3Rotate the control dial to adjust the
selected item.
The volume level is adjustable in 1 dB steps,
from –10 dB to +10 dB.
Repeat steps 2 and 3 to adjust the equalizer
curve.
To restore the factory-set equalizer curve,
press and hold the select button before the
setting is complete.
After 5 seconds, the setting is complete and
the display returns to normal reception/play
mode.
Tip
Other equalizer types are also adjustable.

Adjusting setup items — SET

1Press and hold the select button.
The setup display appears.
2Press the select button repeatedly
until the desired item appears.
3Rotate the control dial to select the
setting (example “ON” or “OFF”).
4Press and hold the select button.
The setup is complete and the display returns
to normal reception/play mode.
Note
Displayed items will differ, depending on the source
and setting.
The following items can be set (follow the page
reference for details):
CLOCK-ADJ (Clock Adjust) (page 4)
CT (Clock Time)
Activates the CT function: “ON,” “OFF”
(page 8, 9).
BEEP
Activates the beep sound: “ON,” “OFF.
AUX-A*1 (AUX Audio)
Activates the AUX source display: “ON,
“OFF” (page 11).
A.OFF (Auto Off)
Shuts off automatically after a desired time
when the unit is turned off: “NO,” “30S
(Seconds), “30M (Minutes), “60M (Minutes).
SUB/REAR*1
Switches the audio output: “SUB-OUT”
(subwoofer), “REAR-OUT” (power amplifier).
B.OUT (Black Out)
Turns off the illumination automatically for any
source (e.g., during radio/CD playback
reception, etc.) if no operation is performed for
5 seconds: “ON,” “OFF.
To bring the light back on, press any button on
the unit. (When activated, remote operation is
unavailable.)
DEMO
(Demonstration)
Activates the demonstration: “ON,” “OFF.
DIM (Dimmer)
Changes the display brightness: “ON,” “OFF.
M.DSPL (Motion Display)
“ON”: to show moving patterns.
“OFF”: to deactivate the Motion Display.
A.SCRL (Auto Scroll)
Scrolls long items automatically: “ON,” “OFF.