KSEEK –/+ buttons

CD:

To skip tracks (press); skip tracks continuously (press, then press again within about 1 second and hold); reverse/fast- forward a track (press and hold).

Radio:

To tune in stations automatically (press); find a station manually (press and hold).

LReceptor for the card remote commanderMMODE button 8, 12

To select the radio band (FM/MW/LW); select the unit*2.

NDSPL (display)/DIM (dimmer) button 8, 9

To change display items (press); change the display brightness (press and hold).

ORESET button (located behind the front panel) 4

PNumber buttons

CD/MD*1:

(1)/(2): ALBM –/+*3*4

To skip albums (press); skip albums continuously (press and hold).

(3): REP 8(4): SHUF 8(6): PAUSE*5

To pause playback. To cancel, press again.

Radio:

To receive stored stations (press); store stations (press and hold).

QAF (Alternative Frequencies)/TA (Traffic Announcement) button 9

To set AF and TA in RDS.

The following buttons on the card remote commander have also different buttons/functions from the unit. Remove the insulation film before use (page 4).

qk < (.)/, (>) buttons

To control CD/radio, the same as (SEEK) –/+ on the unit.

ql VOL (volume) +/– button To adjust volume.w; ATT (attenuate) button

To attenuate the sound. To cancel, press again.

wa SEL (select) button

The same as the select button on the unit.

ws M (+)/m (–) buttons

To control CD, the same as (1)/(2) (ALBM –/+) on the unit.

wd SCRL (scroll) button 8

To scroll the display item.

wf Number buttons

To receive stored stations (press); store stations (press and hold).

*1 When an MD changer is connected.

*2 When a CD/MD changer is connected.

*3 When an MP3/WMA is played.

*4 If the changer is connected, the operation is different, see page 13.

*5 When playing back on this unit.

Note

If the unit is turned off and the display disappears, it cannot be operated with the card remote commander unless (SOURCE) on the unit is pressed, or a disc is inserted to activate the unit first.

Tip

For details on how to replace the battery, see “Replacing the lithium battery of the card remote commander” on page 15.

7