iPod

Playing back iPod

By connecting an iPod to the dock connector at the rear of the unit, you can listen on your car speakers, while controlling the iPod from the unit.

Notes

•When an iPod is connected to the dock connector, operation from the iPod cannot be performed.

•Before connecting the iPod to the dock connector, turn down the volume of the unit.

Playing tracks1Connect the iPod to the dock connector.

The iPod will turn on automatically, and the display will appear on the iPod screen as below.

2Press (SOURCE) repeatedly until “PD” appears.

“PD 1 PORTABLE” appears, and the tracks on the iPod start playing automatically from the point last played.

3Press (MODE) to select the play mode.

The mode changes as follows:

RESUMING t ALBUM t ARTIST tPLAYLIST4Adjust the volume.

Press (OFF) to stop playback.

Tips

•When the iPod is connected to the dock connector, the mode changes to the Resuming mode. In Resuming mode, pressing (3) (Repeat),

(4)(Shuffle) or (5) (Scan) does not function. If you cancel Resuming mode by pressing (MODE) or (1)/

(2)(ALBUM –/+), (3) (Repeat), (4) (Shuffle) or

(5)(Scan) now function to change the play mode.

•When the ignition key is turned to the ACC position, or the unit is on, the iPod will be recharged.

•If the iPod is disconnected during playback, playback will pause.

Note

An another iPod cannot be connected using the XA- 110IP.

Display items

Track/album/artist name, Track number,

Elapsed playing time, Clock

To change display items, press (DSPL).

Note

Some letters stored in iPod may not be displayed correctly.

Setting the play mode

Selecting Album, Artist or Playlist1During playback, press (MODE).

The mode changes as follows:

ALBUM t ARTIST t PLAYLISTSkipping albums, artists and playlists

To

Press

Skip

(1)/(2) (ALBUM –/+)

 

[press once for each]

 

 

Skip

(1)/(2) (ALBUM –/+)

continuously

[hold to desired point]

 

 

9