ILM (Illumination)

To change the illumination color: “ILM-1” (z) or “ILM-2.”

M.DSPL (Motion Display)

To select the Motion Display mode.

–“M.DSPL-SA” (z): to show moving patterns and spectrum analyzer.

–“M.DSPL-ON”: to show moving patterns.

–“M.DSPL-OFF”: to deactivate the Motion Display.

A.SCRL (Auto Scroll)

To scroll long displayed item automatically when the disc/album/group/track is changed.

–“A.SCRL-ON” (z): to scroll.

–“A.SCRL-OFF”: to not scroll.

LOCAL (Local seek mode)

–“LOCAL-OFF” (z): to tune normal reception.

–“LOCAL-ON” : to only tune into stations with stronger signals.

MONO (Monaural mode)*2

To improve poor FM reception, select monaural reception mode.

–“MONO-OFF” (z): to hear stereo broadcast in stereo.

–“MONO-ON”: to hear stereo broadcast in monaural.

REG*2 (Regional)

To set “REG-ON” or “REG-OFF” (z) (page 9).

LPF*3 (Low Pass Filter)

To select the subwoofer cut-off frequency: “LPF OFF” (z), “LPF125Hz” or “LPF 78Hz.”

BTM (page 8)

*1 When the unit is turned off.

*2 When FM is received.

*3 When the audio output is set to “SUB.”

Using optional equipment

Auxiliary audio equipment

By connecting an optional portable audio device to the AUX input jack (stereo mini jack) on the unit and then simply selecting the source, you can listen on your car speakers. The volume level is adjustable for any difference between the unit and the portable audio device. Follow the procedure below:

Connecting the portable audio device

1Turn off the portable audio device.

2Turn down the volume on the unit.

3Connect to the unit.

AUX

AUX

Connecting cord*

(not supplied)

*Be sure to use a straight type plug.

Adjust the volume level

Be sure to adjust the volume for each connected audio device before playback.

1Turn down the volume on the unit.

2Press (SOURCE) repeatedly until “AUX” appears.

“AUX FRONT IN” appears.

3Start playback of the portable audio device at a moderate volume.

4Set your usual listening volume on the unit.

5Press the select button repeatedly until “AUX” appears, and rotate the volume control dial to adjust the input level (–8 dB to +18 dB).

CD/MD changer

Selecting the changer

1Press (SOURCE) repeatedly until “CD” or “MD” appears.

2Press (MODE) repeatedly until the desired changer appears.

Unit number

Disc number

Playback starts.

12