19
Sound Settings and Setup Menu

Changing the sound

settings

Adjusting the sound

characteristics

1During reception/playback, press the
select button.
2Rotate the control dial until the desired
menu item appears, then press it.
3Rotate the control dial to select the
setting, then press it.
4Press (BACK).
The following items can be set:
*1 Hidden when “SET POSITION” is set to
“OFF.”
*2 When the audio output is set to “SUB-OUT”
(page22).
*3 When AUX source is activated (page 23).

Enjoying sophisticated sound

functions — Advanced Sound Engine

Advanced Sound Engine creates an ideal in-
car sound field with digital signal
processing.

Selecting the sound quality

— EQ7 Preset

You can select an equalizer curve from 7
equalizer curves (XPLOD, VOCAL, EDGE,
CRUISE, SPACE, GRAVITY, CUSTOM or
OFF).
1During reception/playback, press the
select button.
2Rotate the control dial until “EQ7
PRESET” appears, then press it.
3Rotate the control dial until the desired
equalizer curve appears, then press it.
4Press (BACK).
To cancel the equalizer curve, select “OFF”
in step 3.
EQ7 PRESET (page19)
EQ7 SETTING (page20)
POSITION
SET POSITION (Listening Position
setting) (page20)
ADJ POSITION*1 (Listening Position
adjustment) (page21)
SET SW POS*1 *2 (Subwoofer Position
setting) (page20)
BALANCE
Adjusts the sound balance: “RIGHT-15”
– “CENTER” – “LEFT-15.”
FADER
Adjusts the relative level: “FRONT-15” –
“CENTER” – “REAR-15.”
DM+ (page21)
RB ENH (Rear Bass Enhancer) (page21)
SW LEVEL*2 (Subwoofer Level)
Adjusts the subwoofer volume level:
“+10 dB” – “0 dB” – “–10 dB.”
(“ATT” is displayed at the lowest
setting.)
AUX VOL*3 (AUX Volume level)
Adjusts the volume level for each
connected auxiliary equipment: “+18
dB” – “0 dB” – “–8 dB.”
This setting negates the need to adjust
the volume level between sources.