An FM program broadcast in stereo is heard in monaural.

The unit is in monaural reception mode.

tSet “MONO-OFF” (page 13).

USB playback

You cannot play back items via a USB hub. This unit cannot recognize USB devices via a USB hub, and is not compatible with a device that has a hub function.

Cannot play back items.

Play back music files are protected by Digital Rights Management (DRM) technology (page 15).

Play back items on non-Mass Storage Class USB devices only.

If a USB device does not work, reconnect it.

A beep sounds.

During playback, the USB device has been disconnected.

tBefore disconnecting a USB device, make sure to stop playback first for data protection.

The sound is intermittent.

The sound may be intermittent at a high-bit-rate of more than 320 kbps.

Error displays/Messages

BLANK*1

Tracks have not been recorded on the MD.*2

tPlay an MD with recorded tracks.

CHECKING

The unit is confirming the connection of a USB device.

tWait until confirming the connection is finished.

ERROR*1

The disc is dirty or inserted upside down.*2 t Clean or insert the disc correctly.

A blank disc has been inserted.

The disc cannot play due to a problem. t Insert another disc.

USB device was not automatically recognized. t Reconnect it again.

FAILURE (Illuminates until any button is pressed.) The connection of speakers/amplifiers is incorrect.

tSee the installation guide manual of this model to check the connection.

FAILURE (Illuminates for about 1 second.) When the SAT tuner is connected, storing an SAT radio channel into a preset failed.

tBe sure to receive the channel that you want to store, then try it again.

HUB NO SUPRT

USB hub or devices that have a hub function are not supported on this unit.

LOAD

The changer is loading the disc.

tWait until loading is complete.

L. SEEK +/–

The local seek mode is on during automatic tuning.

NO DEV (No Device)

(SOURCE) is selected without a USB device connected. A USB device or a USB cable has been disconnected during playback.

tBe sure to connect a USB device and USB cable.

NO DISC

The disc is not inserted in the CD/MD changer.

tInsert discs in the changer.

NO INFO

Text information is not written in the MP3/WMA/ AAC files or ATRAC CD.

NO IPOD

No iPod connected.

tConnect iPod to dock connector.

NO MAG

The disc magazine is not inserted in the CD changer.

tInsert the magazine in the changer.

NO MUSIC

The disc/USB device does not contain a music file.

tInsert a music CD in this unit or MP3 playable changer.

tConnect a USB device with a music file in it.

NO NAME

A disc/album/group/track/artist/playlist name is not written in the track.

NOT READ

The disc information has not been read by the unit.

tLoad the disc, then select it on the list.

NOTREADY

The lid of the MD changer is open or the MDs are not inserted properly.

tClose the lid or insert the MDs properly.

OFFSET

There may be an internal malfunction.

tCheck the connection. If the error indication remains on in the display, consult your nearest Sony dealer.

OVERLOAD

USB device is overloaded.

tDisconnect the USB device, then change the source by pressing (SOURCE).

tIndicates that the USB device is out of order, or an unsupported device is connected.

READ

The unit is reading all track and group/album information on the disc/USB device.

tWait until reading is complete and playback starts automatically. Depending on the disc/USB device structure, it may take more than a minute.

RESET

The CD unit and CD/MD changer cannot be operated due to a problem.

tPress the RESET button (page 4).

USB NO SUPRT (USB Not Support)

The connected USB device is not supported.

tConnect a USB device of Mass Strage Class (page 15).

20