KUSB terminal 9
L 
(front panel release) button 5
MSOURCE button
To power on; change the source (Radio/CD/ MD*1/USB/AUX/SAT*3).
NLIST button 9, 10, 13
To list up.
ODSPL (display) button 8, 9
To change display items.
PNumber buttons
CD/MD*1/USB*2:
(1): REP 8, 10, 13
(2): SHUF 8, 10, 13
(3)/(4): GP*6/ALBM*7
To skip albums (press); skip albums continuously (press and hold).*8
(5): BBE MP*9 2
(6): PAUSE*9
To pause playback. To cancel, press again.
Radio:
To receive stored stations (press); store stations (press and hold).
QSCRL (scroll) button 8, 9
To scroll the display item.
ROFF button
To power off; stop the source.
SAUX input jack 12
To connect a portable audio device.
The following buttons on the card remote commander have also different buttons/functions from the unit. Remove the insulation film before use (page 4).
w; ENTER button
To complete a setting.
wa </, (SEEK
CD/MD*1/USB*2:
To skip tracks (press); skip tracks continuously (press, then press again within about 1 second and hold);
Radio:
To tune in stations automatically (press); find a station manually (press and hold).
ws VOL (volume) +/– button To adjust volume.
wd ATT (attenuate) button
To attenuate the sound. To cancel, press again.
wf SOUND button
To enter sound setting.
wg LIST/CAT*2 button 9, 10, 13 To list up.
wh M/m
To select preset stations/skip groups (press); skip groups continuously (press and hold).
wj Number buttons
CD/MD*1/USB*2:
(1): REP 8, 10, 13
(2): SHUF 8, 10, 13
(6): PAUSE*9
To pause playback. To cancel, press again.
Radio:
To receive stored stations (press); store stations (press and hold).
*1 MD changer is connected.
*2 When a USB device is connected.
*3 When the SAT tuner is connected.
*4 When a CD/MD changer is connected.
*5 When an ATRAC Audio Device is connected.
*6 When an ATRAC is played.
*7 When an MP3/WMA/AAC is played.
*8 If the changer is connected, the operation is different, see page 13.
*9 When playing back on this unit and a USB device.
Notes
•When ejecting/inserting a disc, keep any USB devices disconnected to avoid damage to the disc.
•If the unit is turned off and the display disappears, it cannot be operated with the card remote commander unless (SOURCE) on the unit is pressed, or a disc is inserted to activate the unit first.
Tip
For details on how to replace the battery, see “Replacing the lithium battery of the card remote commander” on page 16.
About USB cap
When not using the USB terminal (K), use the supplied USB cap to prevent dust or dirt entering. Keep the USB cap out of the reach of children to prevent accidental swallowing.
7