Changing the operative direction

The operative direction of controls is factory- set as shown below.

To increase

To decrease

If you need to mount the rotary commander on the right hand side of the steering column, you can reverse the operative direction.

Press (SEL) for 2 seconds while pushing the VOL control.

Adjusting the sound characteristics

You can adjust the bass, treble, balance, and fader.

The bass and treble levels can be stored independently for each source.

1 Select the item you want to adjust by pressing (SEL) repeatedly.

Each time you press (SEL), the item changes as follows:

BAS (bass) tTRE (treble) t

BAL (left-right) t FAD (front-rear)

2 Adjust the selected item by pressing either side of the volume +/– button. When adjusting with the rotary commander, press (SEL) and rotate the VOL control.

Note

Adjust within 3 seconds after selecting the item.

Quickly attenuating the sound

Press (ATT).

After “ATT-ON” momentarily flashes, the “ATT” indication appears in the display.

To restore the previous volume level, press (ATT) again.

“ATT-OFF” flashes momentarily.

Tip

When the interface cable of a car telephone is connected to the ATT lead, the unit decreases the volume automatically when a telephone call comes in (Telephone ATT function).

Changing the sound and display settings

The following items can be set:

•CT (Clock Time) (page 15).

•A.SCRL (Auto Scroll)* (page 9).

•M.DSPL (Motion Display)

– the demonstration mode which appears when no source is selected (e.g., tuner is turned off).

•BEEP – to turn the beep sound on or off.

Selecting the desired item

Press (SEL) and the desired preset number button simultaneously.

(SEL) + (2): CT

(SEL) + (3): A.SCRL*

(SEL) + (4): M.DSPL

(SEL) + (6): BEEP

*When no CD is playing, this item will not appear.

After the mode setting completed, the display returns to normal play mode.

Note

The displayed item will differ depending on the source.

To cancel the item, press (SEL) and the preset number button simultaneously again.

17