Other Functions
Adjusting the balance and fader
You can adjust the balance and fader.
1 Press (SEL) repeatedly until “BAL” or “FAD” appears.
Each time you press (SEL), the item changes as follows:
LOW* t MID* t HI* t
BAL (left-right) t FAD (front-rear)
*When EQ3 is activated (page 12).
2 Press the volume +/– button to adjust the selected item.
Note
Adjust within 3 seconds after selecting the item.
Quickly attenuating the sound
Press (ATT).
The “ATT” appears in the display.
To restore the previous volume level, press (ATT) again.
Canceling the beep sound
Press (6) while pressing (SEL) down.
To activate the beep sound again, press these buttons again.
Note
If you connect an optional power amplifier and do not use the
Setting the equalizer (EQ3)
You can select an equalizer curve for 7 music types (XPLOD, VOCAL, CLUB, JAZZ, N- AGE, ROCK, CUST, and OFF (equalizer OFF)). You can store a different equalizer setting for each source.
Selecting the equalizer curve
1 Press (SOURCE) to select a source (Radio or CD).
2 Press (EQ3) repeatedly until the desired equalizer curve.
Each time you press (EQ3), the item changes.
To cancel the equalizing effect, select “OFF.”
Adjusting the equalizer curve
You can store and adjust the equalizer settings for different tone ranges.
1 Press (SOURCE) to select a source (Radio or CD).
2 Press (EQ3) repeatedly to select the desired equalizer curve.
3 Adjusting the equalizer curve.
1Press (SEL) repeatedly to select the desired tone range.
Each time you press (SEL), the tone range changes.
LOW t MID t HI (t BAL t FAD)
2Press the volume +/– button repeatedly to adjust to the desired volume level.
The volume level is adjustable by 1 dB steps from
3Repeat step 1 and 2 to adjust the equalizer curve.
To restore the
After 3 seconds, the display returns to normal play mode.
Note
When EQ3 is set to “OFF,” you cannot adjust the equalizer curve settings.
12