Other Functions

Adjusting the balance and fader

You can adjust the balance and fader.

1 Press (SEL) repeatedly until “BAL” or “FAD” appears.

Each time you press (SEL), the item changes as follows:

LOW* t MID* t HI* t
BAL (left-right) t FAD (front-rear)

*When EQ3 is activated (page 13).

2 Press the volume +/– button to adjust the selected item.

Note

Adjust within 3 seconds after selecting the item.

Quickly attenuating the sound

Press (ATT).

After “ATT-ON” momentarily appears, the “ATT” appears in the display.

To restore the previous volume level, press (ATT) again.

Tip

When the interface cable of a car telephone is connected to the ATT lead, the unit decreases the volume automatically when a telephone call comes in (Telephone ATT function).

Changing the sound and display settings

— Menu

The following items can be set:

SET (Set Up)

•A.SCRL (Auto Scroll)* (page 9)

•M.DSPL (Motion Display) — the demonstration mode which appears when no source is selected (e.g., tuner is turned off).

•BEEP — to turn the beeps on or off.

Selecting the desired item
Press (SEL) and the desired preset number button simultaneously.
(SEL) + (3): A.SCRL*
(SEL) + (4): M.DSPL

(SEL) + (6): BEEP

*When no CD is playing, this item will not appear.

After the mode setting completed, the display returns to normal play mode.

Note

The displayed item will differ depending on the source.

To cancel the item, press (SEL) and the preset number button simultaneously again.

12