This section contains instructions on the location of controls and basic operations. For details, see the respective pages.
For iPod operation, see “iPod
The corresponding buttons on the card remote commander control the same functions as those on the unit.
AOFF button
To power off; stop the source.
BVolume control dial/select button page 15
To adjust volume (rotate); select setup items (press and rotate).
CSOURCE button
To power on; change the source (Radio/CD/ AUX/PD*1)*2.
DDisplay window
EAUX input jack page 17
To connect a portable audio device.
FOPEN button page 7
GALBM +/– buttons (during MP3/WMA/ AAC playback)
To skip albums (press); skip albums continuously (press and hold).
HReceptor for the card remote commander
ISEEK
CD/PD*1:
To skip tracks (press); skip tracks continuously (press, then press again within about 1 second and hold); reverse/fast- forward a track (press and hold).
Radio:
To tune in stations automatically (press); find a station manually (press and hold).
JMODE button page 11
To select the radio band*2; select the play mode of iPod*1.
KBTM/CAT button
To start the BTM function (press and hold).
AF (Alternative Frequencies)/TA (Traffic Announcement)/PTY (Program Type) button
To set AF and TA (press); select PTY (press and hold) in RDS.
LFrequency select switch
(located on the bottom of the unit) See “Frequency select switch” in the supplied installation/connections manual.
MNumber buttons
CD/PD*1:
(3): REP page 11
(4): SHUF page 11
(6): PAUSE
To pause playback of a CD on this unit. To cancel, press again.
Radio:
To receive stored stations (press); store stations (press and hold).
NDSPL (display)/SCRL (scroll) button page 11
To change display items (press); scroll the display item (press and hold).
ORESET button page 6
PZ (eject) button page 7
To eject the disc.
QDisc slot page 7
To insert the disc.
continue to next page t
9