Card remote commander
1 | ATT | wa |
OFF | ws | |
3 |
| |
MODE |
| |
SOURCE SEL | q; | |
qk |
| |
|
|
+
wd
–
qlDSPL SCRLwf
1 | 2 | 3 | wg | |
4 | 5 | 6 | ||
|
+
w; VOL
–
The following buttons on the card remote commander have also different buttons/functions from the unit. Remove the insulation film before use (page 6).
qk < (.)/, (>) buttons
To control CD/radio/PD*1, the same as (SEEK)
Setup, sound setting, etc., can be operated by < ,.
ql DSPL (display) button To change display items.
w; VOL (volume) +/– button To adjust volume.
wa ATT (attenuate) button
To attenuate the sound. To cancel, press again.
ws SEL (select) button
The same as the select button on the unit.
wd M (+)/m
To control CD/PD*1, the same as (ALBM) +/– on the unit.
Setup, sound setting, etc., can be operated by M m.
wf SCRL (scroll) button
To scroll the display item.
wg Number buttons
To receive stored stations (press); store stations (press and hold).
*1
*2 In the case of a CD/MD changer or SAT tuner being connected; when (SOURCE) is pressed, the connected device (“MD,” “XM” or “SR”) will appear in the display, depending on which device is connected. Furthermore, if (MODE) is pressed, you can switch the changer, or SAT tuner band. (A SAT tuner can only be connected to the CDX- M50IP/M30.)
Note
If the unit is turned off and the display disappears, it cannot be operated with the card remote commander unless (SOURCE) on the unit is pressed, or a disc is inserted to activate the unit first.
About AUX cap
When not using the AUX input jack (5), use the supplied AUX cap to prevent water entering. Keep the AUX cap out of the reach of children to prevent accidental swallowing.
10