Press (MENU).
Snd (Sound)

•HPF (High pass filter for the pre-output) — to select the cut-off frequency of the pre- output.

•LPF (Low pass filter for the subwoofer output) — to select the cut-off frequency of the subwoofer output.

1

2 Press M or m repeatedly until the desired item appears.

Each time you press m, the item changes as follows:

Example

Clock t Beep t RM t English/French/ Spanish t D.Info t SA t Dimmer t Contrast t M.Dspl t A.Scrl* t HPF t LPF

*When no CD or MD is playing, this item will not appear.

Note

The displayed item will differ depending on the source.

Tip

You can easily switch among categories (“Set,” “Snd,” “P/M” (Play Mode) and “Dis”) by pressing M or m for two seconds.

3 Press , to select the desired setting (Example: on or off) or press < or , repeatedly to select the frequency (Example: off, 78 Hz or 125 Hz).

For the “Contrast” setting, pressing , makes the contrast higher, and pressing < makes the contrast lower.

4 Press (ENTER).

After the mode setting is completed, the display returns to normal play mode.

Boosting the bass sound

— D-bass

You can enjoy a clear and powerful bass sound.

The D-bass function boosts the low and high frequency signal with a sharper curve than conventional bass boost.

You can hear the bass line more clearly even while the vocal volume remains the same. You can emphasize and adjust the bass sound easily with the D-BASS button.

Level

D-BASS 3

 

 

D-BASS 2

 

 

D-BASS 1

D-BASS 3

 

 

D-BASS 2

 

 

D-BASS 1

0dB

Frequency (Hz)

Adjusting the bass curvePress (D-BASS)repeatedly to select the desired bass curve.

As the D-BASS number increases so does the effect.

D-BASS 1 t D-BASS 2 t D-BASS 3 t D-BASS off

Note

The bass sound may distort at same volume. If the bass sound distorts, select less effective bass curve.

23