Adjusting the sound characteristics

You can adjust the bass, treble, balance, and fader.

You can store the bass and treble levels independently for each source.

1 Select the item you want to adjust by pressing (SOUND) repeatedly.

Each time you press (SOUND), the item changes as follows:

BAS (bass) t TRE (treble) t BAL (left-right)

tFAD (front-rear) t SUB (subwoofer)

2 Adjust the selected item by pressing < or ,.

When adjusting with the rotary commander, press (SOUND) and rotate the VOL control.

Note

Adjust within three seconds after selecting the item.

Attenuating the sound

Press (ATT) on the card remote commander or rotary commander . “ATT on” appears momentarily.

To restore the previous volume level, press (ATT) again.

Tip

When the interface cable of a car telephone is connected to the ATT lead, the unit decreases the volume automatically when a telephone call comes in (Telephone ATT function).

Changing the sound and display settings

The following items can be set:

Set (Setting)

•Clock (page 9)

•Beep — to turn the beeps on or off.

•RM (Rotary Commander) — to change the operative direction of the controls of the rotary commander.

—Select “norm” to use the rotary commander as the factory-set position.

—Select “rev” when you mount the rotary commander on the right side of the steering column.

•English/French/Spanish — to change the display language to English, French, or Spanish.

Dis (Display)

•D.Info (Dual Information) — to display the clock and the play mode at the same time (on) or to display the information alternately (off).

•SA (Spectrum Analyzer) — to change the display pattern of the equalizer display (page 24).

•Dimmer — to change the brightness of the display (When the illumination cord connected).

—Select “Auto” to dim the display only when you turn the lights on.

—Select “on” to dim the display.

—Select “off” to deactivate Dimmer. •Contrast — to adjust the contrast if the

indications in the display are not recognizable because of the unit‘s installed position.

•M.Dspl (Motion Display) — to turn the motion display on or off.

•A.Scrl (Auto Scroll) (page 11)

22