•The local seek mode is set to “on.”
t Set the local seek mode to “off” (page 18).
•The broadcast signal is too weak. t Perform manual tuning.
The “ST” indication flashes.•Tune in the frequency accurately.
•The broadcast signal is too weak.
t Set to the monaural reception mode (page 18).
A program broadcast in stereo is heard in monaural.•The unit is in monaural reception mode. t Cancel monaural reception mode (page
18).
Interference occurs during FM reception.The wide mode is selected.
tSet the IF mode to “IF Auto” (page 18).
Error displays/Messages
Error displays(For this unit and optional CD/MD changers)The following indications will flash for about 5 seconds, and an alarm sound will be heard.
Blank*1No tracks have been recorded on an MD*2.
tPlay an MD with recorded tracks on it.
Error*1•A CD is dirty or inserted upside down*2. t Clean or insert the CD correctly.
•A CD/MD cannot play because of some problem*2.
t Insert another CD/MD.
Failure*3The connection of speakers/amplifiers is incorrect.
tSee the installation guide manual of this model to check the connection.
FAILURE*3When the XM tuner is connected, storing an XM radio channel into a preset failed.
tBe sure to receive the channel that you want to store, then try it again.
High TempThe ambient temperature is more than 50°C (122°F).
tWait until the temperature goes down below 50°C (122°F).
NO Disc*1No disc is inserted in the CD/MD unit.
tInsert discs in the CD/MD unit.
NO MagazineThe disc magazine is not inserted in the CD/ MD unit.
tInsert the magazine in the CD/MD unit.
NO Music*2A CD which is not a music file is inserted in the MP3 playable CD unit.
tInsert a music CD in the MP3 playable CD unit.
Not ReadyThe lid of the MD unit is open or the MDs are not inserted properly.
tClose the lid or insert the MDs properly.
OffsetThere may be an internal malfunction.
tCheck the connection. If the error indication remains on in the display, consult your nearest Sony dealer.
continue to next page t
25