Changing the sound and display settings

— Menu

The following items can be set:

SET (Set Up)

•A.SCRL (Auto Scroll)*1 (page 12).

•M.DSPL (Motion Display) — to select the Motion Display mode from “1,” “2,” and “OFF.”

–Select “1” to show decoration patterns in the display and activate Demo display.

–Select “2” to show decoration patterns in the display and deactivate Demo display.

–Select “OFF” to deactivate the Motion Display.

•BEEP*2 — to turn the beeps on or off.

Selecting the desired item

Press (SEL) and the desired preset number button simultaneously.

(SEL) + (3): A.SCRL*1

(SEL) + (4): M.DSPL

(SEL) + (6): BEEP*2

*1 When no CD is playing, this item will not appear.

*2 The beep sound is output only when the built-in amplifier is used.

After the mode setting completed, the display returns to normal play mode.

Note

The displayed item will differ depending on the source.

To cancel the item, press (SEL) and the preset number button simultaneously again.

Setting the equalizer (EQ3)

You can select an equalizer curve for 7 music types (XPLOD, VOCAL, CLUB, JAZZ, NEW AGE, ROCK, CUSTOM, and OFF (equalizer OFF)).

You can store a different equalizer setting for each source.

Selecting the equalizer curve

1 Press (SOURCE) to select a source (radio, CD or MD).

2 Press (EQ3) repeatedly until the desired equalizer curve appears. Each time you press (EQ3), the item changes.

To cancel the equalizing effect, select “OFF.”

Adjusting the equalizer curve

You can store and adjust the equalizer settings for different tone ranges.

1 Press (SOURCE) to select a source (radio, CD or MD).

2 Press (EQ3) repeatedly to select the desired equalizer curve.

3 Adjusting the equalizer curve.

1Press (SEL) repeatedly to select the desired tone range.

Each time you press (SEL), the tone range changes.

LOW t MID t HI (t BAL t FAD)

2Press the volume +/– button repeatedly to adjust to the desired volume level.

The volume level is adjustable by 1 dB steps from –10 dB to +10 dB.

3Repeat step 1 and 2 to adjust the equalizer curve.

To restore the factory-set equalizer curve, press (SEL) for 2 seconds.

After 3 seconds, the display returns to normal play mode.

Note

When EQ3 is set to “OFF,” you cannot adjust the equalizer settings.

20