Press (LIST) for 2 seconds.
Enter the characters.
1Press the volume +/– button to
select the desired character.
A y B y C ... y 0 y 1 y 2 ...
y + y – y * ... y *1 y A

If FM stereo reception is poor

— Monaural Mode

During radio reception, press (SENS)

(BTM) repeatedly until “MONO-ON” appears.

“MONO” indicator is displayed.

The sound improves, but becomes monaural (“ST” disappears).

To return to normal radio reception mode, select “MONO-OFF.”

Tip

If FM broadcasts are difficult to hear, set DSO to off (page 21).

Storing only the desired stations

Storing station names

— Station Memo

You can assign a name to each radio station and store it in memory. The name of the station currently tuned in appears in the display. You can assign a name using up to 8 characters for a station.

Storing the station names

1 Tune in a station whose name you want to store.

2

3

You can manually preset the desired stations on any chosen number button.

1 Press (SOURCE) repeatedly to select the radio.

2 Press (MODE) repeatedly to select the band.

3 Press (SEEK) (+) or (SEEK) (–) to tune in the station that you want to store.

4 Press the desired number button ((1) to (6)) for 2 seconds until “MEM” appears.

The number button indication appears in the display.

Note

If you try to store another station on the same number button, the previously stored station will be erased.

*1 (blank space)

2Press (SEL) after locating the desired character.

The next character flashes.

3Repeat steps 1 and 2 to enter the entire name.

4 To return to normal play mode, press (LIST) for 2 seconds.

Tip

Simply overwrite or enter “ ” to correct or erase a name.

16