CD Player

Playing a disc

1 Open the shutter.
2 Insert the disc labelled side up.
Playback starts automatically.
3 Close the shutter.

If a disc is already inserted, press (SOURCE) repeatedly until “CD” appears to start playback.

To

Press

Stop playback

(OFF)

 

 

Skip tracks(SEEK) (–/+)
– Automatic

(./>)

Music Sensor[once for each track]

 

 

Fast-forward/

(SEEK) (–/+)

reverse(m/M)
– Manual Search[hold to desired point]

 

 

Skip albums*(1)(ALBUM–) or
– Albums selection (2)(ALBUM+)

*Available only when an MP3 file is played.

To skip tracks continuously, press (SEEK) (+) or (SEEK) (–), then press again within 2 seconds and hold.

To eject the disc

1 Open the shutter.

2 Push down the shutter.
The disc is ejected.

Notes

•While ejecting or inserting a disc, do not close the shutter. The disc may be caught and damaged.

•A disc may be ejected if you open the shutter forcefully.

•Before playing a track, this unit reads all track and album information on the disc. Depending on the track structure, it may take more than a minute before playback begins. During this time, “READ” is displayed. Please wait for play to start automatically when the reading is complete.

•Depending on the condition of the disc, it may not play back (page 6, 7).

•While the first/last track on the disc is playing, if (SEEK) (–) or (SEEK) (+) is pressed, playback skips to the last/first track of the disc.

•When the last track on the disc is over, playback restarts from the first track of the disc.

•If you play a high-bit rate MP3 file such as 320 kbps, sound may be intermittent.

Tip

A disc can be played with the shutter opened or closed.

11