Refer to the pages listed for details. The corresponding buttons on the card remote commander control the same functions as those on the unit.

aVolume +/– button

To adjust volume.

bATT (attenuate) button

To attenuate the sound. To cancel, press

again.

cDSPL (display)/DIM (dimmer) button 4, 8

To change display items (press); change the display brightness (press and hold).

dOPEN shutter, disc slot (located behind the shutter) 5eDisplay windowfEQ3 (equalizer) button 9

To select an equalizer type (XPLOD,

VOCAL, CLUB, JAZZ, NEW AGE, ROCK,

CUSTOM or OFF).

gOFF button

To power off/stop the source.

hSEEK +/– button

Radio:

To tune in stations automatically (press); find a station manually (press and hold).

CD:

To skip tracks (press); skip tracks continuously (press, then press again within about 1 second and hold); fast-forward/

reverse a track (press and hold).

i (front panel release) button 4 j SOURCE button

To power on/change the source (Radio/CD). k MODE button 8

To select the radio band (FM/AM). l SEL (select) button 4, 9

To select items.

m RESET button (located behind the front

panel) 4

n Number buttons

Radio:

To receive stored stations (press); store stations (press and hold).

CD:

(1)/(2): GP/DISC –/+

To skip groups (press); skip groups continuously (press and hold).

(3): REP 8

(4): SHUF 8 o SENS button

To improve weak reception: LOCAL/

MONO.

p SCRL (scroll) button 8

To scroll the display item. q BTM button 8

To start the BTM function. (press and hold)

rReceptor for the card remote commander

The following buttons on the card remote commander have also different buttons/functions from the unit.

s< (.)/, (>) buttons

To control radio/CD, the same as (SEEK) +/– on the unit. (For details of other operations, see “With the card remote commander” on each pages.)

tVOL (volume) +/– button

To adjust volume.

uM (+)/m (–) buttons

To control CD, the same as (1)/(2) –/+ on

the unit. (For details of other operations, see “With the card remote commander” on each pages.)

vNumber buttons

To receive stored stations (press); store stations (press and hold).

Note

If the unit is turned off and the display disappears, it cannot be operated with the card remote commander unless (SOURCE) on the unit is pressed, or a disc is inserted to activate the unit first.

Tip

For details on how to replace the battery, see “Replacing the lithium battery of the card remote commander” on page 12.

7