Removing the unit
1Remove the protection collar.1Detach the front panel (page 4).
2Engage the release keys together with the protection collar.
Orient the release keys as shown.
3Pull out the release keys to remove the protection collar.
2Remove the unit.1Insert both release keys simultaneously until they click.
Hook facing inwards.
2Pull the release keys to unseat the unit.
3Slide the unit out of the mounting.
Specifications
CD Player section
Wow and flutter: Below measurable limit
Tuner section
FM
Tuning range:FM1/FM2: 87.5 – 108.0 MHz (at 50 kHz step)
FM3: 65 – 74 MHz (at 30 kHz step) Aerial terminal: External aerial connector Intermediate frequency: 10.7 MHz/450 kHz Usable sensitivity: 9 dBf
Selectivity: 75 dB at 400 kHz
0.3% (mono) Separation: 35 dB at 1 kHz Frequency response: 30 – 15,000 Hz
AM
Tuning range:
531 – 1,602 kHz
Aerial terminal: External aerial connector
Intermediate frequency: 10.7 MHz/450 kHzSensitivity: 30 µVPower amplifier section
Outputs: Speaker outputs (sure seal connectors)
Speaker impedance: 4 – 8 ohmsMaximum power output: 50 W ⋅ 4 (at 4 ohms)General
Outputs:
Audio outputs terminal (sub/rear switchable) Power aerial relay control terminal
Power amplifier control terminal
Input:Aerial input terminal
Tone controls:Low: ±10 dB at 60 Hz (XPLOD)
Mid: ±10 dB at 1 kHz (XPLOD)
High: ±10 dB at 10 kHz (XPLOD) Power requirements: 12 V DC car battery
(negative earth)
Dimensions: Approx. 178 ⋅ 50 ⋅ 178 mm (w/h/d)
Mounting dimensions: Approx. 182 ⋅ 53 ⋅ 161 mm (w/h/d)Mass: Approx. 1.2 kg
Supplied accessories:Parts for installation and connections (1 set) Front panel case (1)
Optional accessory:Card remote commander
US and foreign patents licensed from Dolby Laboratories.
continue to next page t
11