Waking up to music (continued)
Tips
•The display window dims while the waking up timer is on.
•You can have the player go on the next day at the same time. Just press STANDBY until the t indication appears in the display. The preset settings remain until you reset them.
Note
The timer mode is canceled:
–when you press TAPE or ( PLAY while music plays in the timer mode.
–when you select “TAPE” using FUNCTION on the remote.
6 Press TIME SET +/– to set the volume, then
DISPLAY/ENTER/MEM.
7 Press STANDBY.
The t indication lights up and the power goes off.
At the preset time, the power will go on and music will play.
To check/change when the playback will start
Press TIMER, then DISPLAY/ENTER/MEM. Each time you press DISPLAY/ENTER/MEM, a stored setting lights up. Change the setting if you need to when the setting lights up. when you finish checking, press TIMER again.
To use the player before a timer playback starts
Just turn on the player, and then you can use it.
If you turn off the player before the preset time, timer playback will start at the preset time.
In case of the radio, however, if you listen to the station which is different from the one you tuned in in step 1 on page 21, you will hear that station at the preset time. Make sure to tune in the station you want to listen to before you turn off the player.
To stop play
Press POWER.
22The Timer