3

 

Start recording.

Deck B

Press ron deck B ((is

REC

 

 

depressed automatically).

 

 

Notes

During recording, do not press ), 0or PLAY on deck A as this causes excessive wow and flutter.

While recording from the built-in microphone (MIC), no sound comes from the speakers or the headphones.

When you connect the microphone to the MIX MIC jack, you cannot record from the built-in microphone.

Tips

Adjusting the volume or the audio emphasis (see page 24) will not affect the recording level.

If the MW/LW program makes a whistling sound after you've pressed rin step 3, set the ISS•FM MODE (Interference Suppress Switch) at the rear to the position that most decreases the noise.

For the best results, use the AC power as a power source.

Use these buttons for additional operations

p6 P

To

Press

 

 

Stoprecording

p6on deck B

 

 

Pauserecording

Pon deck B

 

Pressthebuttonagainto

 

resume recording.

 

 

To erase a recording

1Insert the tape into deck B.

2Disconnect the audio source if connected to the TV/LINE IN jack at the rear.

3Set FUNCTION to TV/LINE IN.

4Press ron deck B.

Operations Basic

BasicOperations 11