Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
With
Other Specifications
CD player section
System
Compact disc digital audio system Laser diode properties
Material: GaAlAs
Wave length: 780 nm
Emission duration: Continuous
Laser output: Less than 44.6 µW
(This output is the value measured at a distance of about 200 mm from the objective lens surface on the optical
Spindle speed
200 r/min (rpm) to 500 r/min (rpm) (CLV) Number of channels
2 Frequency response
20 - 20,000 Hz
Below measurable limit
Radio section
Frequency range
FM: 87.6 - 108 MHz
AM: 530 - 1,710 kHz
Aerials
FM: Telescopic aerial
AM:
Recording system
Approx. 120 sec. with Sony cassette
TYPE I (normal): 70 - 13,000 Hz
General
Speaker
Full range: 10 cm (4 in.) dia., 6 ohms, cone type (2)
Outputs
Headphones jack (stereo minijack)
For 16 - 68 ohms impedance headphones Power output (except US model)
4.5W + 4.5 W (at 6 ohms, 10 % harmonic distortion)
Power requirements
For CD radio
120 V AC, 60 Hz
9 V DC, 6 size D (R20) batteries For memory
6 V DC, 4 size AA (R6) batteries For remote control
Power consumption
AC 25 W
Battery life
For CD radio
FM recording
Sony R20P: approx. 3.5 h
Sony alkaline LR20: approx. 10 h
Tape playback
Sony R20P: approx. 1.5 h
Sony alkaline LR20: approx. 5 h
CD playback
Sony R20P: approx. 1 h
Sony alkaline LR20: approx. 4 h
Dimensions
Approx. 420 × 156 × 262 mm (w/h/d)
(16 5⁄8 × 6 1⁄4 × 10 3⁄8 inches) (incl. projecting parts) Mass
Approx. 4.7 kg (10 lb. 6 oz) (incl. batteries) Supplied accessories
AC power cord (1)
Remote control (1)
Design and specifications are subject to change without notice.
Optional accessories
Sony MDR headphones series
Additional Information | 33 |
|
|