Troubleshooting

General

The power is not on.

•Connect the mains lead to the mains securely.

•Make sure the batteries are inserted correctly.

•Replace all the batteries with new ones if they are weak.

•You cannot turn on the player with the remote when you operate the player on batteries.

The power is not on, and "BATT" and “ERROR” are displayed alternately.

•Make sure the batteries are inserted correctly.

•Replace all the batteries with new ones if they are weak.

There is no audio.

•Adjust the volume.

•Unplug the headphones when listening through speakers.

Noise is heard.

•Someone is using a portable telephone or other equipment that emits radio waves near the player. t Move the portable telephone, etc., away from the player.

CD Player

“no DISC” is displayed even when a CD is in place.

•Insert the CD with the label surface up.

•The CD-R/CD-RW is blank.

•The CD-R/CD-RW was not finalized. Finalize the CD-R/CD-RW with the recording device.

•There is a problem with the quality of the CD-R/CD-RW, recording device or application software.

The CD does not play.

•Make sure that the CD compartment is closed.

•Place the CD with the label surface up.

•Clean the CD.

•Take out the CD and leave the CD compartment open for about an hour to dry moisture condensation.

•Make sure “CD” appears in the display.

•Replace all the batteries with new ones if they are weak.

The sound drops out.

•Reduce the volume.

•Clean the CD, or replace it if the CD is badly damaged.

•Place the player in a location free from vibration.

•Clean the lens with a commercially available blower.

•The sound may drop out or noise may be heard when using poor quality CD-Rs/CD- RWs or if there is a problem with the recording device or application software.

“NOT MP3” is displayed.

•You are trying to play a file that is not an MP3 file but has extension “mp3”. (page 31)

“NOT MP3” and “LAYER 1”, or “NOT MP3” and “LAYER 2” are displayed alternately.

•You are trying to play an MPEG1 Audio Layer-1 or 2 file. You can only play MP3 (MPEG 1 Audio Layer-3) files on this player. (page 31)

“no MP3” is displayed.

• There are no MP3 files on the disc.

Radio

The audio is weak or has poor quality.

•Replace all the batteries with new ones if they are weak.

•Move the player away from the TV.

•If you are using the remote while listening to AM or MW/LW radio, noise may be heard.

The picture of your TV becomes unstable.

•If you are listening to an FM programme near the TV with an indoor antenna, move the player away from the TV.

continued

27