Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
With
Other Specifications
CD player section
System
Compact disc digital audio system Laser diode properties
Material: GaAlAs
Wave length: 780 nm
Emission duration: Continuous
Laser output: Less than 44.6 µW
(This output is the value measured at a distance of about 200 mm from the objective lens surface on the optical
Spindle speed
200 r/min (rpm) to 500 r/min (rpm) (CLV) Number of channels
2 Frequency response
20 - 20,000 Hz
Below measurable limit
Radio section
Frequency range
FM: 87.6 - 108 MHz
AM: 530 - 1,710 kHz
Aerials
FM: Telescopic aerial
AM:
Recording system
Approx. 150 sec. with Sony cassette
TYPE I (normal): 80 - 10,000 Hz
General
Speaker
Full range: 8 cm (3 1⁄4 in.) dia., 6 ohms, cone type (2)
Outputs
Headphones jack (stereo minijack)
For 16 - 68 ohms impedance headphones Power output (except US model)
3.5W + 3.5W (at 6 ohms, 10% harmonic distortion) Power requirements
For CD radio
120 V AC, 60 Hz
9 V DC, 6 size D (R20) batteries For memory
6 V DC, 4 size AA (R6) batteries For remote control:
3 V DC, 2 size AA (R6) batteries Power consumption
AC 25 W
Battery life
For CD radio
FM recording
Sony R20P: approx. 3.5 h
Sony alkaline LR20: approx. 10 h
Tape playback
Sony R20P: approx. 1.5 h
Sony alkaline LR20: approx. 5 h
CD playback
Sony R20P: approx. 1 h
Sony alkaline LR20: approx. 4 h
Dimensions
Approx. 420 × 177 × 281 mm (w/h/d)
(16 5⁄8 × 7 × 11 1⁄8 inches)(incl. projecting parts) Mass
Approx. 5.1 kg (11 lb. 4 oz) (incl. batteries) Supplied accessories
AC power cord (1) Remote control (1)
Design and specifications are subject to change without notice.
Optional accessories
Sony MDR headphones series
Additional Information | 33 |
|
|